Team on the Run Android & iOS update 3.0.0

Features

General

Group of Groups: From web-organization, the administrator is now able to associate groups with a group, and the mobile client can display the details of all groups belonging to a given group.

Non authenticated users in contact list: in previous release there was no indication about subscribers that does not install the application. With the new release we added the indication in contact list about users non authenticated.

Push Notification for Users when New Version is Available: Now, when you go to open a ticket or click ‘contact us’ within the Team on the Run application, a pop-up will be displayed mentioning that you will have to update the application before submitting the ticket.

My Business

Auto-routing, Manual routing, Hybrid Routing execution: Enhancement of the auto-routing feature, with the possibility to manually select recipients at some steps in the process.

Process Escalation Routing Execution: With the escalation feature, if the recipients of a given process does not interact within a fixed period (configured in the process), the process will be escalated to the supervisor.

Call Process Widget: A manager can now initiate a process called parent process, and in back end side new call processes will be created and sent to users based on conditions in the parent process. The manager should be notified about updates on sub process thanks to the call widget in the parent process. The aim of the feature is simplifying complex workflow in some processes.

Messaging

Messages Display Optimization: Changed the display of messages inside the conversation screen, to avoid having spaces between messages sent from the same user in a short time and to have a single picture of the sender for multiple messages sent in a short time.

Read receipt: the mobile client is now sending a report about either the message has been seen or not. The receiver sends the seen information only on the sender request it. Indeed, the sender must enable the option from the application settings.

Send client logs: Added the possibility to send logs to server with screenshots and/or videos. (Team on Mission only)

Geolocation

Geolocation enhancement: the feature consists on awaking the device when it goes to the deep sleep. Indeed, after being enabled from the web-organization if the device goes to the deep sleep a banner will be displayed to the user in order to wake up the device for a few seconds and retrieve location of the user.

Improvements on labels: when no location data Added new reasons when location has not been retrieved and enhance old reasons to explain better the reason for which the mobile client was not able to retrieve the location.

Keep geolocation running in background: in the old behavior “Keep Geoloc Running in Background” is disabled by default and it will be displayed only if User can Change Geoloc Option. In this new feature this parameter it will be displayed as well in app settings: If the frequency tracking is 1 min for the organization and the user can switch on. (By default, the feature “Keep geoloc in background” is activated for all users) if the frequency tracking is superior to 1 min for the organization and the user can switch off. (By default, the feature “Keep geoloc in background” is deactivated for all users.)

Video

Video streaming: In call screen Added the possibility to trigger a video streaming from the call screen. The participant of the audio streaming session are the same participants in the VoIP call.

Additional Enhancements

New VoIP stack release: Integrated new VoIP stack which introduces various bug fixes and added support of the following items: •better thread attachment to VM in order to improve battery use. •Use audio track low latency when available. •3GPP KPI 4 support. •H264 support.

Auto connection to channel upon restart: Currently, on the application, the user does not reconnect to the channels he was connected when any of these events happen(at restart): •Application crashes •Phone reboot •Application manually killed With this enhancement, the app will reconnect to all the channels that were active before crash/reboot/app manually killed.

Cross Call support: Added the support of new firmware of Cross Call devices (Action X3, Core X3, Trekker X4, Trekker 3) with possibility to recover to the legacy mode by disabling a new option added in the accessories section from application settings. à Only on android?

64 Bit support: Added the support of the 64-bit system for native library as requested by Google (Android Only)

Share & Open Photos/Videos with external apps: Added the possibility to share or open an attachment from the application using an external application. (Android Only)

 

 

Webchat/Admin Update 2.3.9

As of now, Webchat/Admin update 2.3.9 is live. Below you will see a list of changes that have occurred to enhance your user experience. There is no download necessary, just open up Webchat and see whats new.

Messages

Read Receipt: When a user sends a message, he/she will now see two notifications. One check to know the message has been sent (normal), the second check will be the color grey until the user reads the message. Once you see double green check marks you will instantly know that not only did the user receive the message but saw it too.

My Business (Administrators)

Call Process Widget: Allow users the ability to add another step to a process that is external to the main process.

New Display for Routing: This has been modified from “Auto-routing” to “Activate routing.” By default, routing is off. When admin switches “activate routing,” all the steps of the process template are displayed.

Manual Routing: When an administrator activates “Manual routing configuration,” it means that, on the user side, it will be up to the process owner to route the process to recipients. There are 2 configurations: “Define allowed list of recipients” & “Define default recipients.”

Hybrid Routing: Enhanced process routing to be hybrid by having both a predefined list of recipients and giving the user the ability to select additional recipients as well.

Deadline Escalation Routing: Set an expiration date and time in the process step(s) after which the process will be routed to other predefined list of recipients.

My Business (Users)

Sorting Processes: Adding in a sorting feature to let users sort category processes.

Additional Features

Group of Groups: At group or department creation, it is possible to add one or more groups/departments and atomic users. This makes it possible to have a group which includes both groups and individual users within.

Audit Server Cleanup: Added a new task to cleanup the database and storage by considering the configurable parameters set by each organization

Settings: The time zone is now configurable in settings.

Configure the display of Root Department: For Admins – Web Company Admin à Settings à Company Settings à Users Authorization à Display company department. This allows you to toggle whether you can see the company department for all users. By default, this will be inactive. *

*To see this option, please have advanced mode activated

Team on the Run iOS & Android Update 2.9.5

Features

Messaging

Voice Memo: Users can now record an audio message (voice memo) and send it directly from the app.

VoIP Calls

Broadcast option in Call Screen: Video streaming added on all the call screens

Broadcast option in Contacts List: Video streaming added on Contacts list.

Instant 1-Click – PTT: When a Push-to-talk user chooses “One Click PTT” as Default action in his app settings a new option named

Screenshot_20190411-141451_Team on the Run (002)
Instant PTT

“Instant PTT” will be displayed just below.

Scenario 1: Instant PTT Disabled:

App behavior remains as before.

Scenario 2: Instant PTT enabled:

When user click on a contact from Contact list screen a One Click PTT session should start immediately with this contact.

Contacts

Add Contacts/Groups Filter on each contact picker: Add Filter for all Contact Pickers (Voip, Messaging, invite users, process recipients,)

Change orientation and define as user profile image: Add button to change the orientation of picture to these interfaces:

1 – After taking photo and before sending it.

2 – Preview photo from the conversation.

3- Preview photo from media, documents & links from details of user.

Search In Full Company: When this parameter is on: Allows communication between users that cannot see each other in the company list, you can go in the contacts search bar and search for all the users available on the server for the organization no matter the restrictions

My Business

Process Expiration Notification: On My Business Main view (Activity page), the due date information is displayed in the process entry:

  • with orange background 24 hours before the due date.
  • with red background at the due date.

Process Option Display: The priority for a process will not be mandatory anymore unless it is defined by the admin at process template creation/edition on web company admin. In any cases, the process option page will not be displayed automatically to the initiator when starting a process.

Display Process Progression: On My Business Main view (Activity page), the process progression is displayed in the process entry: current Step regarding total steps.

Process Step Edition Right: Add restriction that allow process owner to only edit assigned Step content. In addition, greyed effect added for not allowed Steps in order to more show difference between readable and editable Steps.

Name and Search of Processes: Because of performance issue and complexity of the implementation of a full search in content, for the moment, the search will still be performed in process name instance content. Admin will be able to define that for some widgets, their content filled in by process owner in the process, will be automatically be added in the name of process. this approach will solve the customer needs.

Deletion of Processes from New/InProgress: Allow user to delete process instances from New and In Progress Categories.

Signature widget in landscape: In order to allow users to add a signature with large space, the landscape mode has been added for the signature widget.

Geolocation & Map Providers

Geolocation: Display on client/webchat the PLMN – Public land mobile network

– The dispatcher will see the PLMN (Public Land Mobile Network) used by the user’s device on the dispatcher map. Also, the smartphone users will see the PLMN of the user’s tracked. The PLMN will be displayed near the battery and network info so dispatcher will see if the user is connected to the public. GSM network or to the private LTE network.

Geolocation: add support for map provider ArcGIS

Hardware & Accessory Support

Aina: Integration of the secondary PTT 2

Allow user to scroll up/down in the list of active channels. using Aina device up/down button

Aina: Channel switch

Allow user to configure the control of channels with specific button. Meaning from application settings and after being connected to the BLE accessory, user will have the possibility to choose which channel to be controlled for each button.

Telo 590 & 390 support

TELO 590 and 390 are now supported by TOTR with the following capabilities:

  • Channel switch
  • PTT
  • SOS

Cross Call support : Trekker X4 & Action Core X3*

Both Trekker X4 and Action Core X3 are now supported by TOTR with the following capabilities:

  • PTT
  • SOS

*Please note that the features above are working only when device screen is unlocked.

Release Notes: Version 2.3.8 (WebChat + Admin)

Features

Geolocation: Display on client/webchat the PLMN – Public land mobile network

– The dispatcher will see the PLMN (Public Land Mobile Network) used by the user’s device on the dispatcher map. Also, the smartphone users will see the PLMN of the user’s tracked. The PLMN will be displayed near the battery and network info so dispatcher will see if the user is connected to the public. GSM network or to the private LTE network. *Not active till Mobile version is updated in the coming weeks,only server side

Geolocation: add support for map provider ArcGIS

WebChat: Volume control for webchat channels

Volume on WC
Channel volume management now on WebChat
  • The channel banner on WebChat will be enhanced by adding a volume bar control to allow the user to manage the volume on each channel.

 

 

 

WebChat: Playback mode for channels

  • Hear All:
    • This is a new functionality that we add
    • The user will hear all the channels when people are talking on them
    • If the user is talking on a channel, he does not hear other channels
  • Hear First Speaker:
    • This is an existing functionality that we have when channels priorities per organization is turned off
    • The user will hear only the channel on which a user is talking. If on a different channel somebody else is talking it will not be heard.
    • If the user is talking on a channel, he does not hear other channels
  • Hear First Priority:
    • This is an existing functionality that we have when channels priorities per organization is turned on
    • The user will hear only the channel with the highest priority on which a user is talking. If on a different channel with the same priority somebody else is talking it will not be heard.
    • If the user is talking on a channel, he does not hear other channels

WebChat: PTT Call/VoIP calls on Hold àUsers that are envolved in a PTT/Voip or Video call and respond to another PTT, Voip or Video Call will be put on Hold. On mobile, the user will have the possibility to put only one call on hold. On WebChat, the user will have the possibility to put on hold multiple PTT and VoIP calls.

WebChat: Voice Message Recording

Users can now send recorded voice messages (see image below).

web chat recording new
The new “Voice message” option will be displayed between “Attachment” and “Location” options.

 

WebChat: Auto Answer VoIP call from recipient of Man Down Alert.When recipient of a man down alert calls the user in distress, the user in distress will autoanswer the call (VoIP call) to hear the recipient of the man down alert. The VoIP all initiated from the man-down alert pop-up will have the same priority as an Emergency Call.

Miscellaneous

  • Search in full company users list: On Web Company Admin, the administrator can now choose to allow employees to search the entire corporate directory outside of the employees listed on their contacts**
  • Display on Clients the Application Server name where they are connected
  • Password security options
  • DiameterRX: refactor diameter server
  • Radio Gateway: added support for BSI radio gateway type

My Business

  • When creating or editing a process, the admin will now have the right to define the priority level for that process
    • If the option is set to ON
      • The 3 levels are displayed. By default, medium is selected.
      • The Priority level displayed on user side for each process instance executed will be the one set by the Admin and it can not be changed.
Web Admin Priority
Example of Priority Levels

 

Display process progression: This will allow users to see the steps of the processes they create and assign users to each specific step

WebCompanyAdmin_ProcessStep
Example of Display Process Progression

Process Step Edition Right: This feature will let users know that they have the right to edit processes only if assigned to them

Naming automation widget for search: When creating/editing a process, a company admin will be able to define one or more widgets for which the content filled by the user in the process instance will be automatically added in process instance instance. The update of process name will be done either when user presses on SUBMIT or on Complete button.

  • It means that the input of this widget will be added automatically in process instance name on user side and user/admin will be able to search for this entry.
  • Administrator will be able to set a widget entry as search process keyword for all widgets except:
    • Doodle
    • Table
    • Info
    • Separator
    • Signature
    • Upload file
    • Text area
    • Web view
    • Start-stop

Processes export (Admin and User): You can now filter which parts of processes you want to export.

Processes templates export/import (Web Company Admin Only):

[EXPORT] Admin will be able to export process template when:

  1. Admin hovers the mouse over one process template in “My Process” list.
    • The menu button for the template will be displayed. If admin clicks on it, the option of the process template will be displayed.
    • the new “Export” process will be added in the option, right below “Edit option”
      • When admin clicks on it, the export will be generated
  1. Admin clicks on one process instance : process preview is displayed.
    • A new action button “Export” will be displayed, between Edit and Deactivate button.
    • When admin clicks on it the export will be generated

[IMPORT] A new button will be added “Import Processes”.

  • It will be displayed below “Create new process” button.
  • Imported processes will be imported in the “General” category by default. Up to the admin to change the category later.

Enhancements:

◦ CUG V2: add email and position for subscriber

◦ Added the ability to bulk delete for subscribers from webadmin interface

◦ Optimize bulk create mechanism

◦ WebChat: deletion of processes in New and In Progress category

◦ Display webservices duration in logs

◦ Add critical logs for issues on database connection, redis connection, webservice failure because server is down.

 

Team on the Run App Update v2.5.0

What’s new with the latest version of Team on the Run?

CALL OUT

  • Call out : Launch call to external phone number
  • Add a phone number in a PTT call

    4672f12f-f580-4a0c-97c9-6960ee396893
    Make a call outside of your Team on the Run contacts

PTT / CHANNELS

  • Channel: play sound at disconnection/re-connection
  • PTT Sound Enhancements
  • Graphical enhancement : Channels List Network issue warning in Channels list

MESSAGING

  • Manual Acknowledgment of messages
  • Send video/Image with caption
  • Unread Messages Display
  • Access to media of conversations

 GEOLOCATION

  • Point-of-interest (POI) customization reception (icons, colors)
  • Where Are You : Display the last received POI on map + Contacts’ location
  • Where Are You : Date Display enhancement

EMERGENCY MESSAGE

  • Acknowledgment of Alert with headset/headphone button
  • Emergency Message Button Animation Enhancement

DESIGN ENHANCEMENT (iOS only)

  • Swipe on Contacts List
  • Swipe on Conversation List
  • Swipe on My Business Process List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Team on the Run App Update 2.3 is live

A new update is now live for Team on the Run on the Google play store and iOS store. The update v. 2.3, will allow more customization and functionality to the app. Below are the features you can find in the update

422EA89B-CA6E-44E6-A173-279C3F971399.jpg
Make sure your app is updated: Settings > Information & Help

.

 

 

  • Battery Usage and Network used

Description: When sending location mobile client now is sending extra informations to be displayed for dispatch manager in webchat. Information’s are battery usage, network type (wifi,cellular..) and signal strength.

 

  •  Ringtone selection for VOIP/PTT call

Description: Allows user to select a specific ringtones for incoming calls and push to talk.

  •  Emergency Push-to-Talk Call

Description: Allow users to create an emergency Walkie-Talkie group call with a predefined list of groups,

 

 

 

  • Forward a completed process [My Business]

Description: Users will have the possibility to forward a completed process by email or by TOTR.

If you have any questions you can reach us at news@teamontherun.com

Learn more about how Team on the Run’s corporate directory can improve your teams communication: Team on the Run

Follow us on Twitter

Follow us on LinkedIn

Like us on Facebook

Subscribe on YouTube!

totr-blog-banner-003

[2/10/17] Release Notes iOS

Now available in the App Store and on Google Play. Below is a brief breakdown of the included updates:

• The ability to start a message conversation with other MB process participants

To enable this feature: Contact us

• Automatic Emergency Alert sending:

This means that if you select the emergency alert; an alert will automatically be sent if you do not cancel or make a specific alert selection within 30 seconds or so

To enable this feature: Contact us

• Multi-Channel PTT Group Participation

7c3762e2-6428-4397-a369-112fe305d271

– This allows a dispatcher, for example, to participate in multiple groups at the same time.

As always, to simplify your business and learn more about our web to mobile feature, visit us here: Team on the Run

Follow us on Twitter

Follow us on LinkedIn

Like us on Facebook

Subscribe on YouTube!

totr-blog-banner-003

Release Notes: Latest Team on the Run Updates

Release Notes Highlights: End of 2016

These are the most notable updates found within the Team on the Run app over the last month. Moving forward, as each update goes live on iOS and Android you will be able to find the release notes on the blog and across our social platforms. Be sure to subscribe to the blog to be notified when a post goes live.

If you have any additional questions be sure to follow us on Twitter and ask away!

Default action on contact press

Description: The new Default action setting in Settings/Options allows the user to decide what action will be performed when he presses a contact on the Contacts screen.

3 modes are available:

pn1

  • Send message: open or start a conversation with the contact or group (existing behavior and default selected action)
  • Call: trigger a call to the contact or start a Push-To-Talk session if a group was selected
  • Push-To-Talk: start a Push-To-Talk session with the contact or group

Push-To-Talk Floor control sounds

Description: When the Push-To-Talk floor control sounds option is enabled in Settings/Voice Settings/Push-To-Talk Options, floor control sounds will now be noticeable not only to user when pressing or releasing the floor but also when other participants presses / release the floor.

pn2

Push-To-Talk auto-join session sound

Description: When both the Push-To-Talk floor control sounds and Push-To-Talk Auto response options are enabled in Settings/Voice Settings/Push-To-Talk Options, a sound will now be played to notify user that he has automatically joined a PTT session. The join session audio notification sound is only played to the added participant.

*All updates are available on both iOS and Android devices

totr-blog-banner-003

As always, to simplify your business and learn more about our web to mobile feature, visit us here: Team on the Run

Follow us on Twitter

Follow us on LinkedIn

Like us on Facebook

Subscribe on YouTube!